22 TITANS | TU-0100-0V05
The TU-0100-0V05 is a miniature uniaxial IEPE accelerometer in the 22 TITANS V-Series. It uses piezoelectric ceramic shear sensing for vibration measurements. The laser-welded titanium alloy housing is sealed to IP68. Typical applications include modal analysis, vibration control and monitoring, HASS/HALT testing and automotive NVH measurements.
The TU-0100-0V05 is a miniature uniaxial IEPE accelerometer in the 22 TITANS V-Series. It uses piezoelectric ceramic shear sensing for vibration measurements. The laser-welded titanium alloy housing is sealed to IP68. Typical applications include modal analysis, vibration control and monitoring, HASS/HALT testing and automotive NVH measurements.
| Parameter | Unit | TU-0100-0V05 |
|---|---|---|
| Performance | ||
| Sensitivity | mV/g | 100 |
| Measurement Range | g | ±50 |
| Broadband Resolution | g rms | 0.0001 |
| Non-Linearity | % | 1 |
| Frequency Range | ±5% (Hz) | 1–10k |
| Frequency Range | ±10% (Hz) | 0.5–12k |
| Phase Response (±10°) | Hz | — |
| Resonance Frequency | Hz | ≥37k |
| Discharge Time Constant | s | ≤1 |
| Transverse Sensitivity | % | ≤5 |
| Electrical | ||
| Excitation Voltage | VDC | 20–30 |
| Constant Current Excitation | mA | 2–20 |
| Output Impedance | Ω | ≤100 |
| Output Bias Voltage | V | 8–12 |
| Electrical Isolation | Ω | — |
| Noise at 10 / 100 / 1000 Hz | µg/√Hz | 15 / 4 / 2 |
| Environmental | ||
| Sinusoidal Vibration Limit | g rms | 400 |
| Shock Limit | g peak | 1000 |
| Operating Temperature | °C | −40 to +120 |
| Temperature Response | %/°C | −0.1 |
| Physical | ||
| Sealing | Laser-welded, IP68 | |
| Sensing Element | Piezoelectric ceramics | |
| Housing Material | Titanium alloy | |
| Electrical Connector | M5 side | |
| Mounting | M5 | |
| Typical Mass | g | 5.3 |
| TEDS | Optional; may change dimensions | |
| Size | mm | HEX 11.10 × 14.60 |
| Mounting Torque | N·m | — |
| Model Number | TU-0005-0V05 | TU-0010-0V05 | TU-0020-0V05 | TU-0050-0V05 | TU-0100-0V05 | |
|---|---|---|---|---|---|---|
| Performance | ||||||
| Sensitivity | mV/g | 5 (±10%) | 10 (±10%) | 20 | 50 | 100 |
| Measurement Range | g | ±1000 | ±500 | ±250 | ±100 | ±50 |
| Broadband Resolution | g rms | 0.002 | 0.001 | 0.0005 | 0.0002 | 0.0001 |
| Non-Linearity | % | 1 | ||||
| Frequency Range | ±5% (Hz) | 1–10k | ||||
| Frequency Range | ±10% (Hz) | 0.5–12k | ||||
| Phase Response (±10°) | Hz | — | ||||
| Resonance Frequency | Hz | ≥90k | ≥65k | ≥60k | ≥44k | ≥37k |
| Discharge Time Constant | s | ≤1 | ||||
| Transverse Sensitivity | % | ≤5 | ||||
| Electrical | ||||||
| Excitation Voltage | VDC | 20–30 | ||||
| Constant Current Excitation | mA | 2–20 | ||||
| Output Impedance | Ω | ≤100 | ||||
| Output Bias Voltage | V | 8–12 | ||||
| Electrical Isolation | Ω | — | ||||
| Noise (µg/√Hz) | 10 Hz | 300 | 150 | 75 | 30 | 15 |
| 100 Hz | 80 | 40 | 20 | 8 | 4 | |
| 1000 Hz | 40 | 20 | 10 | 4 | 2 | |
| Environmental | ||||||
| Sinusoidal Vibration Limit | g rms | 4000 | 3000 | 2000 | 800 | 400 |
| Shock Limit | g peak | 8000 | 8000 | 5000 | 2000 | 1000 |
| Operating Temperature | °C | −40 to +120 | ||||
| Temperature Response | %/°C | −0.1 | ||||
| Physical | ||||||
| Sealing | Laser-welded, IP68 | |||||
| Sensing Element | Piezoelectric ceramics | |||||
| Housing Material | Stainless steel / Titanium alloy | Stainless steel / Titanium alloy | Stainless steel / Titanium alloy | Stainless steel / Titanium alloy | Titanium alloy | |
| Electrical Connector | M3 side | M3 side | M3 side | M5 side | M5 side | |
| Mounting | M3 | M3 | M3 | M5 | M5 | |
| Typical Mass | g | 4.5 / 4 | 4.5 / 4 | 4.5 / 4 | 8.5 / 5 | 5.3 |
| TEDS | Optional | |||||
| Size | mm | HEX 10.10 × 12.60 | HEX 10.10 × 12.60 | HEX 10.10 × 12.60 | HEX 11.10 × 14.60 | HEX 11.10 × 14.60 |
| Mounting Torque | N·m | — | ||||
Mass values are typical. Where two values are listed, they are shown in stainless steel / titanium order. Vibration and shock limits apply to the unpowered sensor.